Super 60 Pulper

Features:

• Vibration Isolation between pulper tank and shrouding/table connection.
• Cutting Mechanism designed for heavy load of disposable plastic waste stream.
• Pulper and Slurry Pump become one drive - ONE motor - SIMPLE - EFFICIENT.
• Use of standard frame (184TC) motor mounted horizontally (no more pancake style).
• Issue of alignment on UDT tables goes away with special design features.
• Double the slurry flow for improved throughput - much better at handling disposables.
• Significantly higher return flows - better trough and tray flushing with our “no splash” Laminar Flow Tray.
• Tank turbulence enhanced by tank design & return water jets for fast efficient processing.
• Improved Latch for High Tank versions - positive alignment, easy grip, solid feel.
• Constant 3/4 GPM overflow bleeds off through an orifice plate in the return line.
• Water flow balancing issues go away due to remarkable new design concept.
• Totally new look, clean lines with modular concept.
• No motor failures due to water damage - horizontal motor immune to water leakage from impeller seal.
• Major patents pending on several important new design features.

Equipment:

• 6 HP TEFC (Totally Enclosed Fan Cooled) NEMA design B, direct drive motor, 184TC frame.
• Vibration isolation system including (4) 165 lb. rated neoprene compression mounts; with pulping chamber fully isolated from Pulper shell and surrounding structure.
• Cutting mechanism to consist of:
  • Investment cast rotating blade-one piece design, 17-4 stainless steel, hardened to 46 Rockwell C scale.
  • Investment cast security ring, 17-4 stainless steel, with three replaceable stationary cutters.
  • Impeller, 304 stainless steel, with pumping vanes.
• Horizontally mounted Pulper drive system providing pulping and slurry pumping function with one motor, in one integrated assembly.
• Pulping chamber of one piece investment cast 316 stainless steel construction.
• Completely enshrouded Pulper drive system, shrouding also to encase slurry, return water, and fresh water supply manifolds. Shrouding to be 304 stainless steel.
• Six inch floor clearance.
• Hinged stainless steel lid assembly with chrome plated over-center draw latch with limit switch.